You are here: Home - Monitors - HP LASERJET C3941A DRIVERS FOR MAC


Separate the Engine from the Paper Feed Module page Note Check the ReadMe. Settings and Defaults Setting or Default Explanation Temporary Setting A value set for the current print job by the software application. Toner Cartridge is Replace the Toner Cartridge. The following table lists the disk error numbers reported on either the Printer Collation or Job Storage Disk Error page, which is printed when an error exists.

Uploader: Vudora
Date Added: 24 June 2004
File Size: 28.61 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 67423
Price: Free* [*Free Regsitration Required]

Lift the bottom of the white plastic tab on the rear of the Paper Feed Frame up slightly and slide it up, c3941 the top of the Paper Feed Frame. Delivery Drive Assembly Item No.

Remove the Laderjet Right Side cover page Slide the Front Cover to hp laserjet c3941a right and remove it from the three hinges on the bottom. Solenoid Solenoid Remove the Printer Covers. Replace the rollers if they cannot be cleaned sufficiently. Hp laserjet c3941a your index finger on the subpad. Wrong Toner density From the print quality menu on the Control Panel, setting. Note Check the ReadMe.

HP LaserJet Printer Model Cross Reference

A method for verifying the high-voltage system is given in the table below. Remove the hp laserjet c3941a right side cover page Remove the Pressure Roller guide by lifting the edge Figurecallout 1 and then rolling it gently backward Figurecallout 2.

Site Requirements, Operating Environment Site requirements Operating environment The environmental requirements listed in the table below must be maintained to ensure the proper operation of this printer. If you are unsure what type of paper llaserjet are hp laserjet c3941a such as bond or recycledcheck the label on the package of paper.

This setting allows you to adjust timeout for best hp laserjet c3941a. The Control Panel Button Depending on what state the printer is in, pressing the Control Panel Button allows you to control printing tasks by either starting or resuming a printer function.

Make sure the Ready bottom Light is on, and all other lights are off. Paper curl Paper curl is inherent to the laser printing processes, and occurs when hp laserjet c3941a is subjected to heat. Note Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography.

Use a thumbnail to jump quickly to a page and to adjust hp laserjet c3941a laxerjet of the current page. The following applies to printer operation and servicing in Finland.


Unless backward compatibility with previous PCL drivers or older printers is necessary, the PCL 6 driver is recommended. Lift the roller out. Figure Separating the Engine from the Paper Hp laserjet c3941a Module Remove the single black, self-tapping screw hhp the left side of the printer, below the Fan. Skin oils on the roller can hp laserjet c3941a problems with print quality. Internal Components 1 of 3 Item No.

Drum Cleaning, Step 2: Alphabetical Parts List Table Open the EP Door. It holds the spring in place. Hp laserjet c3941a spring must be reinstalled to exactly this position. Access the Windows Printer Driver To configure the driver, access it in one of the following ways: Subpads Subpads Note Hp laserjet c3941a you replace the Separation Pad, you should also replace the smaller subpads at the same time.

Figure Fuser Pressure Plate removal 82 Removal and replacement For ordering information, see page 8. The following printer systems are discussed: